• Sourcing Solutions
  • Services & Membership
  • Help & Community

Quick Details

  • Place of Origin: Guangdong, China (Mainland)
  • Brand Name: Meanwell
  • Model Number: HBG-160-48
  • Output Power: 101 - 200W
  • Output Type: Single
  • Input Voltage: 90 ~ 305VAC 127 ~ 431VDC
  • Output Voltage: 48V
  • Output Frequency: 47 ~ 63Hz
  • Output Current: 3.3A

Packaging & Delivery

Packaging Details Meanwell Box
Delivery Time 3 Days

Specifications

160W 48V Electrical Power Supply
Protections:SC/OC/OV/OT
IP65/IP67 Design for indoor or outdoor
Built-in PFC
5 Year Warranty

Meanwell LED Driver HBG-160-48 (160W 48V 3.3A) Single Output 160W 48V Electrical Power Supply And LED Power Supply

 

 

 

 

MODELHBG-160-48
OUTPUTDC VOLTAGE48V
CONSTANT CURRENT REGION Note.428.8 ~ 48V
RATED CURRENT3.3A
RATED POWER158.4W
RIPPLE & NOISE (max.) Note.2300MVP-P
CURRENT ADJ. RANGE1.98 ~ 3.3A 
Can be adjusted by internal potentiometer A type
VOLTAGE TOLERANCE Note.3±2.0%
LIN EREGULATION±0.5%
LOAD REGULATION±1.0%
SETUP,RISE TIME Note.62500ms, 200ms / 115VAC at full load,500ms, 200ms / 230VAC at full load
HOLD UP TIME(TYP.)12ms at full load 115VAC/230VAC
INPUTVOLTAGE RANGE   90~305VAC 127~431VDC
FREQUENCY RANGE47~63HZ
POWER FACTOR (Typ.)PF>0.98/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load.
(Please refer to "Power Factor Characteristic" curve)
EFFICIENCY (Typ.)93%                
AC CURRENT (Typ.) 1.7A/115VAC  0.78A/230VAC  0.7A/277VAC
MAX.LED DRIVE NUMBER ON MCB C TYPE 16A15units@230VAC
INRUSH CURRENT (Typ.)COLD START 65A(twidth=425μs measured at 50% Ipeak) at 230VAC
LEAKAGECURRENT<0.75mA/277VAC
PROTECTIONOVERLOAD  Note.495~108%
Protection type : Constant current limiting, 
recovers automatically after fault condition is removed
OVER VOLTAGE54 ~ 62V
Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery
OVER TEMPERATURENone
Protection type : Shut down o/p voltage
recovers automatically after temperature goes down
ENVIRONMENTWORKING TEMP.-40~+80°C  (Refer to "Derating Curve")
WORKING HUMIDITY20~95% RH non-condensing
STORAGE TEMP HUMIDITY-40~+80°C 10~95%RH
TEMPCOEFFICIENT±0.03%(0~50°C)
VIBRATION10~500HZ,5G12min/1cycle,72min.each alongX,Y,Zaxes
SAFETY&EMCSAFETY  STANDARDSUL8750,CSA C22.2 No.250.13-12,EN61347-1,EN61347-2-13 approved, design refer to EN60950
WITHSTAND VOLTAGEl/P-o/P:3.75KVAC 1/P-FG:2KVAC 0/P-FG:0.5KVAC
ISOLATIONRESISTANCEl/P-o/P,l/P-FG,O/P-FG:100M Ohms/500VDC/25 °C/70%RH
EMC EMISSIONCompliance to EN55015, EN61000-3-2  Class C (≥60% load) ; EN61000-3-3
EMS IMMUNITYCompliance to EN61000-4 2,3,4,5,6,8,11, EN61547,light industry level (surge 4KV),  criteria A
QTHERSMTBF252.3Khrs min MIL-HDBK-217F(25°C)
DIMENSIONRefer to mechanical specification
PACKING1.53Kg; 8pcs/13.8Kg/1.5CUFT
NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 °C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3.Tolerance : includes set up tolerance, line regulation and load regulation.
4.Constant current operation region is within 60% ~100% rated output voltage, and the output power must be more than 60% rated output power.This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design.
5.Derating may be needed under low input voltages. Please check the static characteristics for more details.
6.Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.

7.The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.

8. tO fulfill requirements of the latest Erp regulation for lighting fixtures,this LED power supply can only be used behind a switch without permanently connected to the mains.

 

Technical Parameters:

 

 

 

 

1.Q:Are you a factory or trading company?
A:We are a Factory,Distributor and Trading Company.

2.Q:Where is your factory located?How can i visit there?
A:Our factory and office is located in Shenzhen City,China.You can fly to Shenzhen Baoan Airport clients,from home or abroad,are warmly welcome to visit us!

3.Q:How can i get some samples?
A:We are honored to offer you samples.

4.How does your factory do regarding quality control?
A:Quality is priority.We always attach great importance to quality controlling for to the very end.Our factory has gained CE,ROHS,SGS authentication.

 

 

1.Payment:T/T.Western Union.MoneyGram.PayPal etc.

2.Delivery Time:3-5 Days.
3.MQQ:10-100 pcs

 

 

1.We are distributors and manufacturers in China.

2.Alibaba assessed 3 years Gold Supplier and 10 years of industry experience.
3.Inspected by the inspection Institution of Bureau Veritas Certification.
4.Price is negotiable if you have large quantity demand
5.100% QC inspection Before Shipping.
6.Best Quality & Best Service with Competitive price.
7.Shipping will be the most economical for you and freight cost is informed in advance for your consideration.decision for the shipping terms will be made according to your requirements.


 

  Send your Inquiry Details in the Below,Click "Send" Now!

Transaction History of the Supplier

Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.

Transaction Overview

Transactions

Transaction Details

This supplier has completedtransactions with buyers from .

Shipping Destination
Transaction Value
Transaction Date
Email to this supplier
Trade Assurance
China (Mainland)
Transaction Level:
Supplier Assessments:
2 Transactions 7,000+
The supplier’s transactions conduted via Alibaba.com in the past 6 months.
The supplier supports Trade Assurance – A free service that protects your orders from payment to delivery.
Supplier's Trade Assurance Limit: US $72,000
Learn More