Meanwell Power Supply LCM-25DA (25W 1050mA) Multiple-Stage Output Current 25W 1050mA 24V Dali LED Driver

FOB Reference Price:Get Latest Price
50 Piece/Pieces (Min. Order)
Supply Ability:
10,000 Piece/Pieces per Month
Port:
ShenZhen
Report Suspicious Activity
Overview
Quick Details
Place of Origin:
Guangdong, China (Mainland)
Brand Name:
Meanwell
Model Number:
LCM-25DA-1050mA
Output Power:
1 - 50W
Output Type:
Single
Input Voltage:
180 ~ 295VAC 254 ~ 417VDC
Output Voltage:
6 ~ 24V
Output Frequency:
47 ~ 63Hz
Output Current:
1050mA
Packaging & Delivery
Packaging Details
Meanwell Original Box
Delivery Time
3 Days

Specifications

25W 1050mA 24V Dali LED Driver
Protections:SC/OT
Built-in PFC
Built-in DALI Interface and Push Dimming
3 Years warranty

Meanwell Power Supply LCM-25DA (25W 1050mA) Multiple-Stage Output Current 25W 1050mA 24V Dali LED Driver

 

 

 

 

 

MODELLCM-25DA-105mA
OUTPUTDC VOLTAGE RANGE6 ~ 24V
SELECTABLE CURRENT Note.31050mA
RATED POWER25.2W
RIPPLE & NOISE (max.) Note.2400MVP-P
RIPPLE  CURRENT±5.0%
NO LOAD OUTPUT VOLTAGE (max.)41V
CURRENT ACCURACY±5.0%
SETUP,RISE TIME Note.6500ms, 50ms / 230VAC at rated power
HOLD UP TIME(TYP.)30ms/230VAC at rated power
INPUTVOLTAGE RANGE   180 ~ 277VAC  254 ~ 392VDC
FREQUENCY RANGE47~63HZ
POWER FACTOR (Typ.)PF≥0.94/230VAC, PF≥0.91/277VAC at rated power (Please refer to "Power Factor Characteristic" section)
TOTAL HARMONIC DISTORTIONTHD<20% When output loading >=50% at 230VAC input and output loading >=75% at 277VAC input.
EFFICIENCY (Typ.)86%                
AC CURRENT (Typ.) 0.17A/230VAC 0.15A/277VAC
INRUSH CURRENT (Typ.)COLD START 20A(twidth=260μs measured at 50% Ipeak) at 230VAC
LEAKAGECURRENT<0.5mA/240VAC
PROTECTIONSHORT CIRCUITConstant current limiting, recovers automatically after fault condition is removed
OVER TEMPERATUREShut Down o/p voltage,recovers automatically after temperature goes down
FUNCTIONDIMMINGPlease refer to "Dimming Operation"Section
SYNCHRONIZATIONPlease refer to "Synchronization Operation"Section
ENVIRONMENTWORKING TEMP.-30~+60°C  (Refer to "Derating Curve" section)
WORKING HUMIDITY20~90% RH non-condensing
STORAGE TEMP HUMIDITY-40~+80°C 10~95%RH
TEMPCOEFFICIENT±0.03%(0~50°C)
VIBRATION10~500HZ,2G10min/1cycle,period 60min.each alongX,Y,Zaxes
SAFETY&EMCSAFETY  STANDARDSUL8750,CSA CSS.2 NO.250.0-08,ENEC EN61347-1,EN61347-2-13,EN62384 independent approved
WITHSTAND VOLTAGEl/P-o/P:3.75KVAC
ISOLATIONRESISTANCEI/P-O/P:>100M Ohms / 500VDC / 25°C/ 70%
EMC EMISSIONCompliance to EN55015, EN61000-3-2 Class C(  50% rated power) ; EN61000-3-3
EMS IMMUNITYCompliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61547 light industry level (surge 2KV), criteria A
QTHERSMTBF213.3Khrs min MIL-HDBK-217F(25°C)
DIMENSION105*68*23mm(L*W*H)
PACKING0.17Kg; 72pcs/13.2Kg/1.04CUFT
NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 °C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3.Please see "DIP switch table".
4.Efficiency is measured at 500mA/80V output set by DIP Switch.
5.Derating may be needed under low input voltages. Please check the static characteristics for more details.
6.No load power consumption<1w is measured at 180-277VAC,with lighting fixture connected and output current dimmed to 0%
7.Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.
8.The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.


Technology Data:
  

 

 

 

 

 

1.Q:Are you a factory or trading company?
A:We are a Factory,Distributor and Trading Company.

2.Q:Where is your factory located?How can i visit there?
A:Our factory and office is located in Shenzhen City,China.You can fly to Shenzhen Baoan Airport clients,from home or abroad,are warmly welcome to visit us!

3.Q:How can i get some samples?
A:We are honored to offer you samples.

4.How does your factory do regarding quality control?
A:Quality is priority.We always attach great importance to quality controlling for to the very end.Our factory has gained CE,ROHS,SGS authentication.

 

 

1.Payment:T/T.Western Union.MoneyGram.PayPal etc.

2.Delivery Time:3-5 Days.
3.MQQ:10-100 pcs

 

 

1.We are distributors and manufacturers in China.

2.Alibaba assessed 3 years Gold Supplier and 10 years of industry experience.
3.Inspected by the inspection Institution of Bureau Veritas Certification.
4.Price is negotiable if you have large quantity demand
5.100% QC inspection Before Shipping.
6.Best Quality & Best Service with Competitive price.
7.Shipping will be the most economical for you and freight cost is informed in advance for your consideration.decision for the shipping terms will be made according to your requirements.


 

  Send your Inquiry Details in the Below,Click "Send" Now!