• Sourcing Solutions
  • Services & Membership
  • Help & Community

Quick Details

  • Place of Origin: Guangdong, China (Mainland)
  • Brand Name: MW
  • Model Number: RSP-1000-12
  • Output Power: 1000W
  • Output Type: Single
  • Input Voltage: 90 ~ 264VAC 127 ~ 370VDC
  • Output Voltage: 12V
  • Output Frequency: 47 ~ 63Hz
  • Output Current: 60A

Packaging & Delivery

Packaging Details: Meanwell Box
Delivery Detail: 3 Days

Specifications

RPS 1000W Switching Power Supply
Protection:SC/OV/OV/OT
Bulit-in remote ON-OFF control
Built-in remote sense function
3 year

Meanwell RSP-1000-12 (1000W 12V 60A) Single Output Parallel Switching Power Supply Built-in Remote Sense and PFC,PF>0.95

 

Features :

 

Universal AC input / Full range

AC input active surge current limiting

Built-in 5V/0.5A auxiliary power

Built-in active PFC function,PF>0.95

Protections:Short circuit / Overload / Over voltage / Over temperature

Output voltage can be trimmed between 40 - 110% of the rated output voltage

Forced air cooling by built-in DC fan

High power density 10.7w/inch3

1U low profile 41mm

Active current sharing up to 4000w(3+1)(Note.8)

DC OK Signal

Built-in remote ON/OFF control

Built-in remote sense function

3 years warranty

 

Specification:

 

MODELRSP-1000-12
OUTPUTDC VOLTAGE12V
RATED CURRENT60A
CURRENT RANGE0~60A
RATED POWER720W
RIPPLE & NOISE (max.)  Note.2150MVP-P
VOLTAGEADJ.RANGE10~13.5V
VOLTAGE TOLERANCE  Note.3±1.0%
LINEREGULATION±0.5%
LOADREGULATION±0.5%
SETUP,RISE TIME300ms, 50ms at full load
HOLD,TIME(TYP.)16ms/230VAC          16ms/115VAC at full load
INPUTVOLTAGERANGE        Note.590~264VAC  124~370VDC
FREQUENCYRANGE47~63HZ
POWER FACTOR (Typ.)0.95/230VAC          0.98/115VAC at full load
EFFICIENCY (Typ.)83%               
AC CURRENT (Typ.)   12A/115AVC          6A/230VAC      
INRUSH CURRENT (Typ.)25A/115VAC          40A/230VAC
LEAKAGECURRENT<2.0mA / 240VAC
PROTECTIONOVERLOAD105~125%rated output power
Protection type : Constant current limiting, recovers automatically after fault condition is removed
OVER VOLTAGE13.8 ~ 16.8V
Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE85 °C ± 5 °C (TSW2 ) detect on heatsink of O/P diode; 75 °C ± 5 °C (TSW1 ) detect on heatsink of power transistor
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
FUNCTIONAUXILIARY POWER(AUX)5V @ 0.5A (+5%, -8%)
REMOTE ON/OFF CONTROL Note.6Power on : short between on/off(pin6) & -S(pin2) on CN50    Power off : open between on/off(pin6) & -S(pin2) on CN50
DC OK SIGNALThe TTL signal out, PSU turn on = 0 ~ 1V ; PSU turn off = 3.3 ~ 5.6V
OUTPUT VOLTAGE TRIM Note.6Adjustment of output voltage is possible between 40 ~ 110% of rated output
CURRENT SHARING(CS)Note.7Please refer to function manual
ENVIRONMENTWORKING HUMIDITY20 ~ 90% RH non-condensing
WORKING TEMP.-20 ~ +60 °C (Refer to output load derating curve)
STORAGE TEMP HUMIDITY-40~+85 10~95%RH
TEMPCOEFFICIENT±0.02%/ °C (0~50 °C )
VIBRATION10~500HZ,2G 10min/1cycle,60min.each alongX,Y,Zaxes
SAFETY & EMC(Note 4)WITHSTAND VOLTAGEI/P-O/P:3KVAC     I/P-FG:2KVAC     O/P-FG:0.5KVAC
ISOLATIONRESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25 °C/70%RH
EMI CONDUCTICN&Compliance to EN55022 (CISPR22)
RADIATION
HARMONICCURRENTCompliance to EN61000-3-2,-3
EMS IMMUNITYCompliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A
QTHERSMTBF35Khrs min  MIL-HDBK-217F(25 °C)
DIMENSION295*127*41mm (L*W*H)
PACKING1.95Kg; 6pcs/12.7Kg/1.15CUFT
NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
6. The power supply unit will have no output if the shorting connector is not assembled. It contains two shorting wires: one is from on/off(pin6) to -s(pin2)
and the other is from Vco(pin8) to Vca(pin10). Please refter to function manual for details.
7.  In parallel connection, maybe only one unit operate if the total output load is less than 5% of rated load condition.
8. Please consult MEAN WELL for applications of more units connecting in parallel.

 

Technology Data: 

 

 

PayMent:

 

1. Telegraphic Transfer (T/T)

2. West Union

3. Paypal

4. L/C

 

Products Photo:

 

 

 

Packing Detail:

 

Transaction History of the Supplier

Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.

Transaction Overview

Transactions

Transaction Details

This supplier has completedtransactions with buyers from .

Shipping Destination
Transaction Value
Transaction Date
Email to this supplier
Trade Assurance
China (Mainland)
Transaction Level:
Supplier Assessments:
3 Transactions 4,000+
The supplier’s transactions conduted via Alibaba.com in the past 6 months.
The supplier supports Trade Assurance – A free service that protects your orders from payment to delivery.
Supplier's Trade Assurance Limit: US $79,000
Learn More